Видео

Great video

One of the very best DIY videos I have ever seen. Thank you very much for this.

K but what about the top rack wheels! 😢

I'm misplaced the G bolts for a T-3000 during move. Is there a place where purchase the parts or can you tell me the size /length of the bolts? Thank you

Thank you for the great video! I set my Hunter SRC to only run one program (A) which activates 5 stations to start running at 4:30 am on MWF mornings. This morning, my one of my stations was still running at 7:45am! What did I do wrong? All other programs (B and C) are programmed to off

Do you have a link for the blinds that you installed?

This worked great for me. Thank you!

Whoa i did it with an spark plug tool which was too short to really turn , Yes i could use a longer extension , it took me like 30 minutes to get it on right , I could had used another inch, Good Grief, Thanks for the video. I did it right . Amen , single woman in a house with a lawn to mow

Thank you for making this ! Your voice is VERY CLEAR; that really helps a LOT! =)

OMG. I am at a vrbo and want to leave the place in good condition so they continue to be pet-friendly in their listing. I obviously don't want to go buy a vaccum and was looking for a practical, cheap solution. This is it. This is how it should be done as opposed to encouraging people to go break their bank accounts.

Very informative. Thank you

Thank you thank you thank you! Was going out of my mind. Company's coming and I have to get these towel racks hung!

This is the most complicated coffee maker I have ever had. Someone gave it to my daughter and she gave it to me. I cannot figure out how to even get the filter cup back on to use the coffee maker. That is why I’m going through videos to try to get a clue.

Pretty good video but it would have been nice if you had given the part number.

great video - exactly what I needed - thanks!

Thank you

Thank you so much this helps me and mom were struggling for like 30 minutes and I found this video

April 2024 & I Thank you sooo very much! I, 57 yr old female, purchased my Rigid Vac, saw the extra parts and came straight to RUclips and just like I knew it, YT NEVER disappoints! I definitely appreciate you for helping me to assemble my vac! Thank Goodness for YT & Thank you Sir for thanking your precious time to enlighten us!❤❤

Great video! Very easy to follow. THANK YOU!! I got it done, all it took was a little bit of elbow grease to tease the old cartridge out. I'm a "senior" gal over 70. Just call me Josephine the plumber, lol.

Thank you so much! First time doing this and your help is a life saver😁

Do I have to wait a certain amount of time after use to unscrew the let out valve on the bottom after each use? Also if there is air left in the tank when I’m done, is that okay?

Can you post a video for the brake light on the spoiler how to remove install?

2024, still getting value from this video ! This guy needs some kind of award !

Wish I could get you to do our shower door! Lol! Thanks for the video!

Worst pipe I ever worked with in my entire life. The life span of the pipe isn't anything like PVC overtime any sharp object underground will puncture the pipe the pipe or cause it to split. Splits I could repair many times with pressure of a couple of worm gear clamps. I suggest PVC or PEX in stead of the old black plastic pipe.

This video was the reason I tackled cleaning out the dishwasher filter and parts. Great video!

As an instructional video, hard to top that.

Tip for anybody having trouble with the pull tabs like I did: if the pull tabs are getting pulled out completely when you are pulling on them with the intention of compressing the metal spring on the opposite side and then decompress to fill in the channel. Then not to worry because duct tape could be your freind, if you are able to get in 3 corners but not the fourth one because you need grip to pull on it but your fingers don't fit, then stick a piece of duct tape on the outer side of the screen frame and pull on it so you can you use it as a handle to bring the forth corner in place.

useless. We don't even what type of riser is there

My sprinklers run off a pump, I have one line that comes off spigot, straight to garden. Since the pump is not on thought I could water directly by just opening the spigot, but water started draining at the drain valve instead of pushing through. Anyway when the pump is off, I can still run the water? Thanks 🙏

Hello, I just watched your very informative video on how to change a Moen shower cartridge and am going to try and also replace mine due to a drip. How do I know which cartridge to get? Is there a part number on the old cartridge and where do I get it from? Thank you Sue G.

Thank you so much. I am a woman and have to take care of myself so I got out my phone and looked you up and I was blessed thank you so much.

This guy is pretty caulky 😂

Thanks for the truthful criticism.

Piece of junk never starts

Thanks bud

Used to have these until the connectivity issues came where the music would constantly go in and out and sometimes disconnect. They were great for the time being

Finally found a well researched video for my GE Profile dishwasher filter removal. 9 years later...thanks so much!~

Super easy to follow directions. Thank you. You made this super simple for me.

I remember seeing these Maxi-Paws at an apartment my family lived in about 11 years ago now. These seem to give off a oily smell when they get weathered and the sun hits them.

Thank you. You made assembly easier than reading instructions 👍🏾💯

Thanks for sharing. How to clean it?

Wow nicely done ✔️

I swear you can learn anything off RUclips. Lmao thanks bro happy 420

Seems same as Mastercraft Angle Finder. Battery goes in slide out tray, push side button. When mine times out, I have press reverse button then the on button.

Thx man!!

Nice job great explanation! Thank you!

Hands down the best how to video. The Mike Rowe of Diy. No music, no bs, just calm, easy steps. Thank-you

Thanks! 12:19

Note to everyone: if the hard water stains are old(one year and even sometimes sooner) then nothing but buffing out the hardwater will work. I've tried and wasted my money on " guaranteed solutions" and have even contacted a friend in the glass installation business and nothing will save old, etched in, hardwater on any glass.